Day 4

Today i did few things.

1. experimented with the Mult function, that splits signal into 2.

Ex: out 42 -> vintech mic in -> vintech mic out -> mult 1 in, -> out mult 2 and 3 -> protools analogue inputs 26 and 27.

I realized that i need to assign the channel to mix A in order to be able to hear it playback in the headphones. it won’t playback. Also we need to make sure that the ProTools volume is close to 0.

Cue b is 2d aux send that can be used for cue/aux send. We never really use it

The right way to send signal to headphones is:

First, select all the channels you want to be sent to headphones (ex. press ch1 "to" 24). Then press EFX to Trk in the center section. Then press set aux. Then, on one of the channels, in the aux/cue section, hold down the set efx/cue b button and press the cue stereo (first aux at the top) until the light goes to efx. Then press cues stereo again so that “on” lightens up. Turn up the the CUE ST level pot as a ‘short fader’ that controls the level of the ALT source. Now you can adjust the faders in the control room without making changes to the mix heard in the headphones.